Home > 60mm Servo Motor
| Item | Specifications |
|---|---|
| Flange Size | 60 mm (NEMA 24) |
| Motor Type | Permanent Magnet AC Servo |
| Rated Power | 0.2 – 0.6 kW |
| Rated Torque | 0.64 – 1.91 N·m |
| Feedback | 17-bit Absolute Encoder |
| Supply Voltage | 220V AC |
| Rated Speed | 2000 – 3000 rpm |
| Insulation Class | Class F |
| Protection | IP65 |
| Ambient Temperature | -20℃ ~ +50℃ |
| Brake | Optional (power-off) |
| Cooling | Natural |
| Model | Rated Power (kW) | Rated Torque (N·m) | Peak Torque (N·m) | Rated Speed (rpm) | Rated Current (A) | Standard length (mm) | Length with brake (mm) | Insulation/Protection | Voltage |
|---|---|---|---|---|---|---|---|---|---|
| 60BSF-S02030 | 0.2 | 0.64 | 1.92 | 3000 | 1.7 | 83.5 | 118.5 | Class F / IP65 | 220V |
| 60BSF-S04030 | 0.4 | 1.27 | 3.81 | 3000 | 2.5 | 95.5 | 130.5 | Class F / IP65 | 220V |
| 60BSF-S06030 | 0.6 | 1.91 | 5.73 | 2000 | 3.5 | 113.5 | 148.5 | Class F / IP65 | 220V |
*Representative models. We can manufacture products according to customer’s requirements.
A 60mm servo motor is a small permanent-magnet AC servo on a 60 mm flange, the NEMA 24 frame size. It is the workhorse size for light industrial motion, running closed-loop on a 17-bit absolute encoder so the drive always knows rotor position and holds it under load. It runs on a 220V supply at up to 3000 rpm and sits on packaging lines, labelers, small CNC and pick-and-place.
The 60 frame comes in three models rated 200 W, 400 W and 600 W, with peak torque to three times rated for acceleration. The 200 W and 400 W run to 3000 rpm; the 600 W runs to 2000 rpm with more torque. Rated torque and current per model are in the specification table above.
A 400 W servo is the common small-machine servo. It has enough torque for general packaging axes, labelers, feeders, small CNC and pick-and-place, while staying compact and fast. In the 60 frame it is the middle model, with the 200 W for lighter axes and the 600 W when you need more torque. Send your axis load and speed and we will confirm the fit.
Yes. The 60 frame is built for this — light, fast, repeatable motion is exactly what packaging, labeling and small-machine axes need. The absolute encoder means no homing on power-up, and the compact frame fits tight, multi-axis layouts. Send the axis load, travel and speed and we will size the model.
Yes. Each 60mm servo ships with a matched servo drive, sized and tuned to the motor as a tested set, so commutation, gain and inertia matching are set before delivery. The drive runs position, speed and torque modes, with pulse and direction or bus communication depending on the model. You can also pair the motor with your own drive — ask us for the data you need.
Yes to both. A power-off holding brake is available for vertical or inclined axes, and the braked version is longer — see the table for the dimension. A planetary gearbox is available to trade speed for torque on slower, higher-load axes. Specify the gear ratio when you ask for a quote.
The 60mm servo uses a 17-bit absolute encoder for closed-loop feedback. Absolute means the axis knows its position the moment power comes on, so there is no homing routine after a power cycle — useful on packaging and multi-axis machines that restart often. The encoder also closes the loop continuously, so the motor holds position under a changing load.
Yes. The 60mm servo is built for OEM integration, so the shaft diameter, length and keyway can be made to your drawing. We can add a brake, fit a gearbox, and change the connector and cable. Send your drawing or application and we will confirm what we can match.
The 60mm servo motor is a small permanent-magnet AC servo on a 60 mm (NEMA 24) flange, the workhorse size for light industrial motion. It runs 0.2 to 0.6 kW with 0.64 to 1.91 N·m of rated torque and three times that as peak, on a 220V supply, and turns at up to 3000 rpm. It runs closed-loop on a 17-bit absolute encoder, so the axis knows its position on power-up and holds it under load. The 400W model is the common pick, which is why this frame sits on packaging lines, labelers, small CNC and pick-and-place.
The 60 frame is the small end of industrial servos — light, fast and precise, for axes that move modest load at speed:
All three share the 60 mm frame and the absolute encoder; they differ in power, torque and top speed. The 200W and 400W run to 3000 rpm for fast axes; the 600W trades top speed for more torque at 2000 rpm. The 400W is the usual choice for general packaging and small-machine axes.
| Model | Power | Rated Torque | Best Fit |
|---|---|---|---|
| 60BSF-S02030 | 200 W | 0.64 N·m | Light, fast axes — labeling, small pick-and-place |
| 60BSF-S04030 | 400 W | 1.27 N·m | The common pick — packaging, small CNC, feeders |
| 60BSF-S06030 | 600 W | 1.91 N·m | More torque in the 60 frame — small machine axes |
Not sure which fits? Send the axis load and running speed and we will confirm the model. For lighter, sub-100W axes, the 40mm servo motor is the smaller frame.
The 60mm servo suits light, fast, precise axes across small machines:
Each 60mm servo ships with a matched servo drive, sized and tuned to the motor as a tested set, so commutation, gain and inertia matching are set before delivery. The drive runs position, speed and torque modes, with pulse and direction or bus communication depending on the model. Common changes: shaft diameter, length and keyway to your drawing, a power-off holding brake for vertical axes, a planetary gearbox, and connector and cable to suit. As a servo motor manufacturer, we test the motor and drive together and ship the encoder built in.
